Taylor 811 Series Operator's Manual page 27

ADJUST VOLUME Key
The Adjust volume key displays the current volume. To
increase or decrease the volume, use the up and down
arrow keys.
Note: To scroll at a faster rate, press and hold the arrow
key.
Figure 6-15
MENU EDIT Key
The Menu Edit key is used to program a new menu item
or make changes to an existing one. When the Menu Edit
key is pressed, the following screen will display:
Figure 6-16
If there is more than one screen of menu items, press the
Previous or Next arrow keys to access the other menu
items.
Operating Procedures
Press the menu item key to be programmed. The
following screen will display:
131022
To edit a menu item, press the menu item key to bring up
a virtual keyboard. Use the back arrow to scroll to the
beginning of the name (Item 1). Press the Del key until all
of the characters are removed. Type in the desired name
(up to 9 characters) and press the OK key to return to the
previous screen.
If the box is blank (creating a new Item), type in the
desired name (up to 9 characters). A maximum of two
lines of description can be used. Press the OK key to
return to the previous screen.
131023
ACTIVE: YES or NO
Pressing the ACTIVE key toggles between YES and NO.
Selecting YES will allow the menu item to be displayed
on the main menu screen. If NO is selected, the menu
settings remain saved in the control after the OK key is
pressed, but will not be visible on the main menu screen.
(See Figure 6-17.)
Model 811, 813, 819, 821 Series
OPERATING PROCEDURES
Figure 6-17
Figure 6-18
131024
131025
6
6-5