Taylor 811 Series Operator's Manual page 43

45. Rinse both sides of the release sheets with a clean,
sanitizer-soaked grill cloth.
Figure 6-68
46. Place the release sheets on a clean, flat surface to
air-dry overnight.
47. Wipe the lower grill surface with a clean, sanitizer-
soaked grill cloth. Repeat until no visible soil remains.
48. Remove and empty the grease cans.
Figure 6-69
49. Wash, rinse, and re-install the grease cans.
50. Wipe all areas with a clean, sanitizer-soaked grill
cloth.
51. Wipe all exterior panels.
Operating Procedures
For 24-Hour Stores Only
Re-install the release sheets on the opposite side than
14544
previously used. Secure the sheets with the release
sheet clips and retainers. Start up the grill per instructions
starting on page 6-1.
Non-24-Hour Stores Only
14587
1. Apply a light coat of vegetable oil to the entire lower
grill surface.
2. Leave the upper platens in the OPEN position
overnight.
Model 811, 813, 819, 821 Series
OPERATING PROCEDURES
Figure 6-70
Figure 6-71
14352
14549
6
6-21