Taylor 811 Series Operator's Manual page 7

Ventilation and Clearance
To ensure proper operation of this appliance, it must be
installed so that the products of combustion are efficiently
removed.
Minimum clearance from construction:
• 3 in. (76 mm) from back wall to flue deflector
• 34 in. (864 mm) aisle width in front of grill for
grease can removal
Combustible construction:
• 3 in. (76 mm) from mounted grease cans
CAUTION! After setup, do not store anything
on top of the grill. Failure to follow this instruction may
result in a fire hazard.
To the Installer
Grease Disposal Container
If the grill is not factory-equipped with grease disposal
containers, the store is required to provide appropriate
grease disposal containers in accordance with NSF
Standard 4 requirements.
Model 811, 813, 819, 821 Series
TO THE INSTALLER
1-3
1