Control Panel
JF1 contains header pins for various control panel connections. See the figure below for the
pin locations and definitions of the control panel buttons and LED indicators.
All JF1 wires have been bundled into a single cable to simplify this connection. Make sure
the red wire plugs into pin 1 as marked on the motherboard. The other end connects to the
control panel PCB board.
JF1
1
2
Power Button
Reset Button
3.3V
Red+
(Blue LED_Cathode_UID)
NIC2 (Activity) LED
NIC1 (Activity) LED
ID_UID/3.3V Stby
3.3V
Key
NMI
19
20
Figure 4-1. JF1 Control Panel Pins
65
Chapter 4: Motherboard Connections
Ground
Ground
Power Fail (for LED6)
Blue+
(Red OH/Fan Fail/PWR Fail for LED5/Blue UID LED)
NIC2 (Link) LED
NIC1 (Link) LED
HDD LED
FP PWR LED
Key
Ground