Front Leds For 3.5" Drives - Supermicro SuperStorage SSG-610P-ACR12N4H User Manual

Front LEDs for 3.5" Drives

There are several LEDs located on the front of the chassis. These are used to indicate the
status of the internal 3.5" drives as shown in the table below.
LED Color
Red
Red
Status
Green
Green
Figure 1-3. Front LEDs for 3.5" Drives
Universal Information LED
Status Blinking Pattern
Located 0~11 HDD Blinking while locating
HDD Fail Solid On
Located 12~23 HDD Blinking while locating
HDD Fail Solid On
12
Chapter 1: Introduction
Applicable Devices
SAS/SATA
SAS/SATA
SAS/SATA
SAS/SATA