Expansion Cards - Supermicro SuperStorage SSG-610P-ACR12N4H User Manual

3.9 Expansion Cards

The chassis supports two full height and one low profile PCIe expansion cards.
Installing an Expansion Card
1. Power down the system as described in Section 3.1 and remove the rear cover.
2. Remove the riser card bracket from the system.
3. Install the add-on card in your preferred slot on the riser bracket and secure with the
provided screws.
4. Insert the riser card bracket into the motherboard expansion slot while aligning the riser
card bracket with the rear of the chassis.
5. Secure the bracket with the provided screws.
Figure 3-11. PCI Expansion Card Chassis Slots
Item Description
1 PCIe 4.0 x16 slot (HHHL) (CPU0)
2 PCIe 4.0 x8 slot (HHHL) (CPU0)
3 PCIe 4.0 x16 slot (HHHL) (CPU1)
4 PCIe 4.0 x16 AIOM slot (CPU0)
Chapter 3: Maintenance and Component Installation
1
Expansion Slot Locations
Associated Riser Card
SSG-610P-ACR12N4L: RSC-AOM-X6 (bridge board for AOM-S3224)
SSG-610P-ACR12N4H: RSC-X-6G4
RSC-PR-6-X2
RSC-X-6G4
N/A
52
2 3
4