Chapter 1 Introduction; Overview - Supermicro SuperStorage SSG-610P-ACR12N4H User Manual

1.1 Overview

This chapter provides a brief outline of the functions and features of the SuperServer
SSG-610P-ACR12N4H/L. It is based on the X12DPD-A6M25-P motherboard and the
CSE-802ETS-R804AMP chassis.
The following provides an overview of the specifications and capabilities.
Motherboard
Chassis
Processor
Support
Memory
Drive Support
Expansion Slots
I/O Ports
System Cooling
Power
Form Factor
*Intel Optane PMem 200 Series supported by 3rd Gen Intel Xeon Scalable Processors
(83xx/63xx/53xx Series) only.
Notes: A Quick Reference Guide can be found on the product page of the Supermicro website.
The following safety models associated with the SSG-610P-ACR12N4H/L have been certified
as compliant with UL or CSA: 802-R8X12 and 802-8.
Chapter 1
Introduction
System Overview
X12DPD-A6M25-P
CSE-802ETS-R804AMP
Dual 3rd Generation Intel® Xeon® Scalable processors
16 DIMM slots for up to 4TB 3DS ECC DDR4-3200/2933/2666/2400 RDIMM/LRDIMM
or 18TB Intel Optane™ DDR4-2666: DCPMM, RDIMM/LRDIMM//DCPMM*
®
SSG-610P-ACR12N4L: 12 hot-swap 3.5" SAS3/SATA3 drive bays with AOM-S324-
DPD-L, IT mode
SSG-610P-ACR12N4H: 12 hot-swap 3.5" SAS3/SATA3 drive bays with AOC-S3916L-
H16IR-32DD+, IR mode
Four EDSSF (PCIe 4.0)
Two 2.5" 7mm NVMe/SATA drive bays
Two onboard M.2 NVMe/SATA slots (22x80mm)
One PCIe 4.0 x8 slot supported by CPU1
One PCIe 4.0 x16 slot supported by CPU1
One PCIe 4.0 x16 AIOM slot supported by CPU1
One PCIe 4.0 x16 slot supported by CPU2
One COM port (Micro USB port, rear)
One VGA port (rear)
Two 25G SFP+ ports with Mellanox CX-4
Six 4-cm counter-rotating fans
Two air shrouds
Two redundant power supply modules (PWS-804P-1R)
800W (Platinum Level)
1U W x H x D: 17.6" x 1.7" x 37" (447 x 43 x 940mm)
9
Chapter 1: Introduction