Bmc - Supermicro SuperStorage SSG-610P-ACR12N4H User Manual

3.12 BMC

The BMC can be reset using the button on the front control panel or on the chassis rear.
•
Reset—Press and hold the button. After six seconds, the LED blinks at 2 Hz. The BMC
resets and the reset duration is ~250 ms. Then the BMC starts to boot.
•
Restore factory default configuration—Hold the button for twelve seconds. The LED blinks
at 4 Hz while defaults are configured.
•
Firmware update—the UID LED blinks at 10Hz during a firmware update.
Chapter 3: Maintenance and Component Installation
BMC Reset Options
Event LED (Green)
Reset Blinks at 2 Hz
Restore
Blinks at 4 Hz
Defaults
Update Blinks at 10 Hz
61