Supermicro SuperStorage SSG-610P-ACR12N4H User Manual page 26

Slide rail mounted equipment is not to be used as a shelf or a work space.
The illustration below shows both the left and right rails mounted on a rack, ready to accept
the server chassis.
Left Rail
Figure 2-3. Installing the Toolless Rails to the Rack
Note: The figure above is for illustrative purposes only. Always install servers at the bottom
of the rack first.
Warning: Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing. Failure to
stabilize the rack can cause the rack to tip over.
Figure 2-3. Installing the Outer Rails to the Rack
Note: Figure is for illustrative purposes only. Always install servers to the bottom of a rack first.
Chapter 2: Server Installation
26
Right Rail