Supermicro SuperStorage SSG-610P-ACR12N4H User Manual page 47

Figure 3-5. Internal Logical Drive Numbers
Adding/Replacing a Front 2.5" Hard Drive
1. There is no need to power down.
2. Locate and press the latch on the HDD you wish to remove from the chassis, then pull
the handle up.
3. Slide the HDD away from its backplane socket and lift it out. Note the number on the
floor of the chassis.
Chapter 3: Maintenance and Component Installation
Figure 3-6. Replacing Front Drives
47
7
11
6
10
9 5
8 4
3
2
1
0
D