Supermicro SuperStorage SSG-610P-ACR12N4H User Manual page 48

Pull
handle
up
3.5" HDD
Figure 3-7. Adding and Replacing 3.5" Hard Drives
Replacing an Internal 3.5" Hard Drive
1. There is no need to power down.
2. With the top cover removed, locate and press the latch on the HDD you wish to remove
from the chassis, then pull the handle out.
3. Use the handle to oull the HDD completely out of the drive bay.
4. Remove the screws securing the old drive to the tray, then insert a new drive and
secure with the same screws.
Chapter 3: Maintenance and Component Installation
Latch
Figure 3-8. Installing a Drive to a Tray
48