Appendix C - Graph Of Power Output - Thermo Scientific Shandon TissueWave 2 Operator's Manual

Appendix C - Graph of Power Output

If a procedure uses a
Temperature Reading
should be used.
The following graph can be used to identify the
Output Duty Cycle (%).
for a given
Notes:
The Power Output shown in the graph is a theoretical value based on a
nominal line voltage input into the microwave unit.
The Actual Power Output will vary depending on the available line voltage.
Power Setting (in Watts)
Power Process Operation Method
, the
TissueWave 2 Operator Guide
as opposed to a
Power (Watts)
51