Sleep; Main Menu; Programme - Strong SRT 8222 User Manual

Digital terrestrial hd twin tuner receiver

Table of Contents

6.9 Sleep

Press SLEEP repeatedly to select an automatic switch off time, at which the unit will go to standby.

Default is OFF.

The main menu gives you access to settings and multimedia functions. To access the main menu,

press MENU in viewing mode. The main menu consists of the following sub menus: Programme,

Picture, Channel Search, Time, Option, System and USB. Throughout the main menu, MENU or EXIT can

be used to get back to the previous screen. Use t u and OK to select or to change settings. Use the

button suggestions at the bottom of the screen available for certain functions. For some menu items

a valid Password it is necessary to access the item. Default Password is 1234.

Programme Edit

To access this menu, you must enter a valid Password. The procedures are equal for the DVBT TV List

and DVBT Radio List. Use t u to change between the TV and Radio lists.

NOTE:

For successful editing of channel list, switch Off LCN function. See ch. 7.3

Moving channels

Use pq to select a channel and press RED to select it to be moved. Now you can move the selected

channel up or down inside the channel list by using pq. When the channel is on the position of your

choice, press OK again. The channel is now fixed on its new position. When all changes have been

made, press EXIT. A saving banner will pop up.

Skipping channels

Channels marked with Skip will be skipped when zapping channels with the pq buttons. The

channels will still be available from the channel list.

Use pq to select a channel and press GREEN to mark or unmark it for skipping. Channels set for

skipping will be marked with the  symbol. When all changes have been made, press EXIT. A Saving

banner will pop up.

Locking channels

Locked channels can only be watched after entering the password. (DEFAULT PASSWORD: 1234)

Press pq to select a channel and press YELLOW to lock or unlock it. You are asked to enter the PIN

code. Locked channels will be marked with the  symbol. Locking/unlocking multiple channels in

one session is possible. When all changes have been made, press EXIT. A Saving banner will pop up.

Delete

Use pq to highlight a channel and press BLUE to mark it for deletion. When you have marked the

channel you wish to delete, a confirmation banner will be displayed. Select OK to delete the marked

channel or Exit to cancel. Press EXIT after finishing.

Table of Contents