Usb - Strong SRT 8222 User Manual

MAC Address
Status

7.9 USB

Multimedia
This function allows playback of different kind of files from the connected USB storage device.
Select Music and press OK to playback MP3 files from your folders. Select Photo and press OK to view
your favourite pictures in JPG format. Select Movie and press OK to enter to play a number of video
formats. Select PVR and press OK, and select the HBPVR folder to show the recordings you've made.
The unit supports USB HDD devices with FAT32 format. However, it is possible to use already on a PC
formatted NTFS HDD device. Make sure your USB device is formatted correctly. Use the On-Screen
button suggestions and the multimedia buttons like RECALL (Return), u, 3 and 2 on the remote
control to work inside the multi media player.
Photo Configure
Slide Time
Slide Mode
Movie Configure
Subtitle Specific
Subtitle BG
Subtitle FontColor
PVR Configure
Record Device
Timeshift Size
NOTE:
Format
WARNING:
If you have multiple partitions on your storage device, select the partition you would like to format
and press OK to continue. A confirmation banner will now be displayed. Press OK to start formatting
(or EXIT to cancel it). The format procedure will take some time, depending on the size of the used
settings, switch DHCP to Off and to Edit, press GREEN and enter the required
numbers. However, some technical knowledge about TCP/IP protocols is
required.
Information about the unit's unique identification to the LAN port.
Information about the current status of your Ethernet connection.
Setup your preferences for Photo viewing. Press u and photos will be shown
in an automatic slide mode.
Time between advancing to the next photo.
Many different modes can be used, for dissolving to the next photo, defined
by a number. Also, it is possible to select Random order to view the photos.
For Subtitle use in the movie player, setup the features here.
Select either normal, big or small for Subtitle size.
Select the preferred colour of the Subtitle Background.
Select the preferred colour of the Subtitle characters.
For this option to work, you must have a USB device connected.
If your USB device should have more than 1 partition, select the one to use.
Select the amount of free space, to be assigned to the Timeshift function.
Default is 1GB, which would account for around 1 hour of video, depending
on the video format and resolution.
Below this setting information is shown about the current partition or
device.
The use of a USB Hard Disk Drive, already formatted in a PC with FAT32 or
NTFS is recommended.
The format function will delete all data and information from your USB
device or selected partition. Manufacturer will not take any responsibility
for damaged or lost data on the USB device.
17