Picture; Channel Search - Strong SRT 8222 User Manual

NOTE:

7.4 Picture

Use this menu to match your receiver to your TV set.
The following settings are available:
Aspect Ratio:
Auto
4:3 Letterbox
4:3 Pan&Scan
4:3 Full
16:9 widescreen
16:9 Pillarbox
16:9 Pan&Scan
16:9 Pillarbox 16:9 Pan&Scan
Resolution
576i:
576p:
720p:
1080i:
1080p(50Hz):
Auto:
TV Format

7.5 Channel Search

Auto Search
14
For successful editing of channel list (see ch 7.1), switch Off LCN function.
Select the aspect ratio that matches your TV. This There is either a 4:3 or a 16:9
possibility. Select in combination the preferred conversion method how to
show a 16:9 programme on a 4:3 TV, or a 4:3 programme on a 16:9 TV. The
options are:
In most cases this default setting should suffice, but it can be changed to
cope with broadcast errors or personal taste.
The full 16:9 programme will be displayed on your 4:3 TV set with black bars
above and below the picture
A centre cut-out of the 16:9 programme will be displayed full-screen on your
4:3 TV, missing content to the left and right.
A 16:9 programme will be compressed sideways on a 4:3 TV, to show a full
picture without any black bars
A 4:3 programme will be show full screen, with sideways stretched content.
A 4:3 programme will be shown normally, but with black bars to the left and
right.
A 4:3 programme will be shown as a centre blow up to fill the whole screen,
missing content to the left, right, top and bottom of the programme.
broadcasts in full screen on a 4:3 TV. Letterbox: black bars on top and bottom
of the picture on a 4:3 TV. Combined: shows a mix in-between. Ignore: shows
as it is.
If the video quality does not appear correctly, change the setting. These
settings match the most common settings for HDMI.
For analogue TVs (on Scart connection).
For digital SD TVs (some digital TVs do not support this mode).
For digital HD TVs (on HDMI connection).
For digital HD TVs (on HDMI connection).
For digital HD TVs (on HDMI connection).
The best possible resolution available will be auto negotiated by between
TV and receiver ('handshake') when using a modern digital HD TV when
connected with an HDMI cable.
Options are PAL and NTSC. For European broadcasts, the TV format is PAL
(Default). The setting is most important for TVs connected via Scart cable.
Using NTSC might deliver black& white pictures.
This menu allows you to search for channels from all available frequencies
for your selected region automatically. Be aware that all previous installed
channels and favourite list(s) will be deleted. The new-found channels will be