Option; System Settings - Strong SRT 7000 User Manual

PART 1 • English

7.5 option

Press MEnU and select Option. In this menu you can adjust the OSD Language, Subtitle Language, Audio
Language, Digital Audio mode and Banner Time.
Select an option and press tu to adjust the setting.
Press EXIT to exit the menu.
oSD language
Select the preferred language of On Screen Display.
Subtitle language
Select the preferred subtitle language.
Audio language
Select the preferred audio language for watching TV channels.
If the language is not available, the default program language will be used
Digital Audio
Select digital audio output mode (relevant only if an audio amplifier is connected to the S/PDIF output)
PCM – audio from any format will be converted to PCM format
RAW – audio from receiver will be send in original format
OFF – digital audio output disabled
banner Time
Set the duration of info banner displaying. Possible settings are: 1~10 seconds.

7.6 System Settings

Press MEnU and select System. The menu provides options to adjust the system settings.
Press pq to select an option and press tu to adjust the setting. Press EXIT to exit the menu.
SET PASSWoRD
Set or change the password for locked programs and menu access. Enter your old password or the
default password '0000'. You will then be asked to enter your new password. To confirm re-enter your
new password. Once it is confirmed, press EXIT to exit the menu.
Restore factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select Restore Factory Default and press ok or u to select. Enter your password or the
default password '0000' and press ok to confirm. This option will delete all your channels and settings.
The receiver will reboot and start with First Installation menu.
WARnIng: A factory reset will permanently delete all your personal settings, timers and stored
channels. Please consider this before you perform a factory reset.
Information
It shows model, software and hardware information.
Recall list
Enable or disable Recall list function, which supports multi-recall-channel switching. If the status is set
ON then by pressing RECAll button a list of all previous selected channels will be displayed for new
selection. If the status is set OFF then by pressing RECAll button receiver will switch to the previous
selected channel.
15