Option; System Settings - Strong SRT 7002 User Manual

PART 1 • English
When you have entered all parameters, press ok to store your booking.
Edit:
Delete:
noTE: You can set timers for programmes directly from the EPG. Please refer to section 6.8 for
more details.

7.5 option

Press mEnu and select Option. In this menu you can adjust the OSD Language, Subtitle Language, Audio
Language, Digital Audio mode and Banner Time.
Select an option and press tu to adjust the setting.
Press EXIT to exit the menu.
OSD Language:
Subtitle Language:
Audio Language:
Digital Audio:
PCM – audio from any format will be converted to PCM format
RAW – audio from receiver will be send in original format
RAW (HDMI On)- As RAW, but also affects the HDMI output.
OFF – digital audio output disabled
banner Time
Set the time-out for the info banner. Possible settings are: 1~10 seconds.

7.6 system settings

Press mEnu and select System. The menu provides options to adjust the system settings.
Press pq to select an option and press tu to adjust the setting. Press EXIT to exit the menu.
set Password
Set or change the password for locked programmes and menu access. Enter your old password or the
default password '0000'. You will then be asked to enter your new password. To confirm, re-enter your
new password. After confirming, press EXIT to exit the menu.
Restore factory default
Reset your receiver to the default factory settings.
Select Restore Factory Default in the main menu and press ok or u to select. Enter your password or the
default password '0000' and press ok to confirm. This option will delete all your channels and settings.
The receiver will reboot and start with the First Installation menu.
right channel number by selecting the first letters of the channel´s name in the
pop up window.
Press the gREEn button to edit an existing booking.
Press the bluE button to delete a booking from the list. Press ok to confirm
deleting or EXIT to cancel.
Select the preferred language for the On Screen Display.
Select the preferred subtitle language.
Select the preferred audio language for watching TV channels. If the language
is not available, the default programme language will be used
Select digital audio output mode. Settings affect both S / PDIF and
HDMI outputs.
17