Quick Start Wizard Via The Handheld Programmer - Siemens SITRANS LR460 HART Operating Instructions Manual

Quick Start Wizard via the handheld programmer

Notes:
• The wizard is a complete package and the settings are inter-related.
• Do not use the Quick Start wizard to modify individual parameters. See instead
Parameter Reference
has been completed.)
• Changes apply only at the end of the sequence, after you select Apply changes.
• Each time the Quick Start Wizard is initiated, the start-up settings are factory
defaults. The Wizard will not recall previous user-defined settings.
The Quick Start menu appears as soon as you activate PROGRAM mode.
1. Quick Start
a. Point the programmer at the display [from a maximum distance of 600 mm (2 ft.)],
then press Mode
b. Press Right ARROW
c. Press Right ARROW
d. To change a setting, scroll to the desired selection or key in a new value.
e. After modifying a value, press Right ARROW
the next menu item, the PROGRAM icon disappears, and the rightmost digit
flashes to indicate Navigation Mode.
1.1. Language
Options
1.2. Application Type (APPL)
Options
1.3. Operation
Options
A5E42035355
on page 45. (Perform any customization only after Quick Start
to activate PROGRAM mode and open Menu level 1.
to navigate to menu item 1.1.
to open Edit mode: the PROGRAM icon
ENGLISH, DEUTSCH, FRANCAIS, ESPANOL
STEEL
Silo construction
CONCRETE
Distance to material surface referenced from Low Calibration
LEVEL
Point (process empty level).
Distance to High Calibration Point (process full level)
SPACE
referenced from material surface.
Distance to material surface referenced from Sensor
DISTANCE
Reference Point.
SITRANS LR460 – INSTRUCTION MANUAL
will flash.
to accept it. The LCD displays
Page 29