Quick Start Wizard Via The Handheld Programmer - Siemens SITRANS LR250 Operating Instructions Manual

Quick Start Wizard via the handheld programmer

Notes:
• Default settings in the Quick Start Wizard are indicated with an asterisk (*) unless
explicitly stated.
• When using the handheld programmer, the Quick Start wizard settings are inter-
related and changes apply only after you select FINISH in Wizard Complete.
• Do not use the Quick Start wizard to modify individual parameters: see instead
Parameter Reference (LUI) on page 96
Start has been completed.)
1. Quick Start
a. Point the programmer at the display [from a maximum distance of 300 mm (1 ft)],
then press RIGHT arrow
b. Press RIGHT arrow
enter the Quick Start Wizard.
c. Press RIGHT arrow
values and move directly to the next item.
d. To change a setting, scroll to the desired item or key in a new value.
e. After modifying a value, press RIGHT arrow
to move to the next item.
f. Quick Start settings take effect only after you select Finish in Wizard Complete.
1.1. Quick Start Wizard
Introduction
Note:
The introduction screen is displayed only on the device when using the
handheld programmer. This screen is not part of the Quick Start Wizard when using
AMS Device Manager.
Introduction to Quick Start Wizard showing purpose of wizard: to setup common
applications easily.
Options
Language
Selects the language to be used on the LCD and takes effect immediately.
Options
Page 36 SITRANS LR250 (FF) – OPERATING INSTRUCTIONS
to activate PROGRAM mode and open menu level 1.
twice to navigate to menu item 1.1 and DOWN arrow
to open Edit mode or DOWN arrow
CANCEL, NEXT
*
ENGLISH
DEUTSCH
FRANCAIS
ESPANOL
简体中文
. (Perform customization only after the Quick
to accept it and press DOWN arrow
to
to accept default
7ML1998KL01