Quick Start Wizard Via The Handheld Programmer - Siemens SITRANS LR460 Operating Instructions Manual

Commissioning
6.2 Quick start
• Point the programmer at the display (from a maximum distance of 600 mm [2 ft.] and
press Mode to activate PROGRAM mode.
• Use ARROW keys to navigate to a menu item.
• Press Right ARROW to open Edit mode: the PROGRAM icon will flash.
①
②
③
• If required, scroll to the desired item or key in a new value and press Right ARROW to
accept it. The LCD displays the new value and the PROGRAM icon disappears.
• Press Mode to return to RUN mode.
6.2.6

Quick start wizard via the handheld programmer

Note
• The wizard is a complete package and the settings are inter-related.
• Do not use the Quick Start wizard to modify individual parameters. See instead Parameter
assignment (Page 67). (Perform any customization only after Quick Start has been
completed.)
• Changes apply only at the end of the sequence, after you select Apply changes.
• Each time the Quick Start Wizard is initiated, the start-up settings are factory defaults. The
Wizard will not recall previous user-defined settings.
The Quick Start menu appears as soon as you activate PROGRAM mode.
1. Point the programmer at the display [from a maximum distance of 600 mm (2 ft.)], then
press Mode to activate PROGRAM mode and open Menu level 1.
2. Press Right ARROW to navigate to menu item 1.1.
3. Press Right ARROW to open Edit mode: the PROGRAM icon will flash.
4. To change a setting, scroll to the desired selection or key in a new value.
5. After modifying a value, press Right ARROW to accept it. The LCD displays the next menu
item, the PROGRAM icon disappears, and the rightmost digit flashes to indicate Navigation
Mode.
46
Parameter value
Menu item
PROGRAM icon
Operating Instructions, 10/2021, A5E42035355-AB
SITRANS LR460