Siemens SITRANS LR460 HART Operating Instructions Manual page 129

Values in hex notation
0x10
0x01
0X1F
0xC4
0XDE
a.
This could happen when a firmware download has been done, but a system
reset has not been done. This could also happen if the function blocks are not
configured properly using the handheld programmer, PDM or acyclic services.
A5E42035355 SITRANS LR460 (PROFIBUS PA) – INSTRUCTION MANUAL
Status Codes for Bad Quality
Description
The LOE timer has expired: this could be caused by
LOE or by a sensor malfunction: value is BAD.
There is an error in the configuration of the function
blocks in PROFIBUS PA
The function block, or the transducer block, has been
placed out of service.
Bad configuration: value is BAD.
AI block out of service: value is BAD.
a
.
Page G-123