Specifications; Power; Performance - Siemens SITRANS LR460 HART Operating Instructions Manual

Specifications

Siemens Milltronics makes every attempt to ensure the accuracy of these
Note:
specifications, but reserves the right to change them at any time.
SITRANS LR460

Power

Power Supply
• 100 to 230 V AC,
• 24 V DC, +25/-20%, 6 W
• Fuse (AC)
• Fuse (DC)

Performance

Reference operating conditions according to IEC 60770-1
• ambient temperature
• humidity
• ambient pressure
Measurement Accuracy (measured in accordance with IEC 60770-1)
• non-linearity (accuracy)
• non-repeatability
• deadband (resolution)
• hysteresis error
Analog Output Accuracy (measured in accordance with IEC 60770-1)
• non-linearity (accuracy)
• non-repeatability
• deadband (resolution)
• hysteresis error
Frequency
Measurement range
1.
Referenced from flange face.
A5E42035355

15%, 50/60 Hz, 6 W
SI1 Fast acting ceramic, 4 x 20 mm, 1 A, 250 V AC
SI2 Slow-Blow, 4 x 20 mm, 0.63 A, 250 V AC
SI1 Fast acting ceramic, 4 x 20 mm, 2 A, 250 V AC
SI2 Slow-Blow, 4 x 20 mm, 0.63 A, 250 V AC
+15 to +25
45 to 75% relative humidity
860 to 1060 mbar (12.47 to 15.37 psi)
greater of 25 mm (1") or 0.25% of span (including
hysteresis and non-repeatability)
10 mm (0.4") [included in non-linearity specification]
10 mm (0.4") [included in non-linearity specification]
0 mm
0.100% of span (including hysteresis and repeatability)
0.030% of span (included in non-linearity specification)
0.030% of span [included in non-linearity specification]
0%
25 GHz nominal
1
0.35 to 100 m (1. 1 5 to 328.08 ft)
SITRANS LR460 – INSTRUCTION MANUAL
o
C
Page 7