Siemens SITRANS LR460 HART Operating Instructions Manual page 2

Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of
others, and to protect the product and the connected equipment. These warning notices are
accompanied by a clarification of the level of caution to be observed.
Qualified Personnel: This device/system may only be set up and operated in conjunction with this
manual. Qualified personnel are only authorized to install and operate this equipment in accordance with
established safety practices and standards.
Unit Repair and Excluded Liability:
•
The user is responsible for all changes and repairs made to the device by the user or the user's
agent.
•
All new components are to be provided by Siemens.
•
Restrict repair to faulty components only.
•
Do not reuse faulty components.
Warning: Cardboard shipping package provides limited humidity and moisture protection. This product
can only function properly and safely if it is correctly transported, stored, installed, set up, operated, and
maintained.
This product is intended for use in industrial areas. Operation of this equipment in a residential area
may cause interference to several frequency based communications.
Note: Always use product in accordance with specifications.
Copyright Siemens AG 2017. All
Rights Reserved
This document is available in bound version and in
electronic version. We encourage users to purchase
authorized bound manuals, or to view electronic
versions as designed and authored by Siemens.
Siemens will not be responsible for the contents of
partial or whole reproductions of either bound or
electronic versions.
European Authorized Representative
Siemens AG
Industry Sector
76181 Karlsruhe
Deutschland
•
For a selection of Siemens level measurement manuals, go to:
www. siemens.com/processautomation. Select Products & Systems, then under Process
Instrumentation, select
product family.
•
For a selection of Siemens weighing manuals, go to:
www. siemens.com/processautomation. Under Products & Systems, select
Batching Systems.
© Siemens AG 2017
Level Measurement.
Manual archives can be found on the Support page by product family.
Disclaimer of Liability
While we have verified the contents of this
manual for agreement with the
instrumentation described, variations remain
possible. Thus we cannot guarantee full
agreement. The contents of this manual are
regularly reviewed and corrections are
included in subsequent editions. We welcome
all suggestions for improvement.
Technical data subject to change.
Manual archives can be found on the Support page by
Weighing and