Operating Sitrans Lr460 Via Simatic Pdm; Functions In Simatic Pdm; Features Of Simatic Pdm Rev. 6.0 Sp3 (Or Higher); Features Of Simatic Pdm Rev. 5.2 Sp1 - Siemens SITRANS LR460 HART Operating Instructions Manual

Operating SITRANS LR460 via
SIMATIC PDM
For a complete list of parameters with instructions, see
Note:
page 45.
starting on
SIMATIC PDM is a software package used to commission and maintain SITRANS LR460
and other process devices. Please consult the operating instructions or online help for
details on using SIMATIC PDM. (You can find more information at
pcs.khe.siemens.com/index.aspx?nr=3695.)

Functions in SIMATIC PDM

SIMATIC PDM monitors the process values, alarms and status signals of the device. It
allows you to display, compare, adjust, verify, and simulate process device data.
Accessing Functions in PDM
See

Features of SIMATIC PDM Rev. 6.0 SP3 (or higher)

The graphic interface in SITRANS LR460 makes monitoring and adjustments easy.
• A graphical Quick Start wizard groups together all the settings you need to make for
a simple application into four easy steps. See
on page 31.
Echo profile saving and viewing
• See
Trend Diagram (Level Trend over Time)
• See
Manual TVT Shaper
• See
The following dialog boxes appear as they would using a PROFIBUS PA device.
Note:
Screens may appear slightly different when using a HART device.

Features of SIMATIC PDM Rev. 5.2 SP1

• SIMATIC PDM Rev. 5.2 SP1 is supported only for basic configuration and
troubleshooting. (For advanced features such as the Quick Start wizard, Rev. 6.0 SP3
or higher is required.)
A5E42035355
on page 40 for operating instructions.
on page 38 for easy echo profile comparison.
on page 39.
SITRANS LR460 – INSTRUCTION MANUAL
Parameter Reference
https://
Quick Start Wizard via SIMATIC PDM
on page 38 for Level trend monitoring.
Page 37