Quick Start Wizard Via The Handheld Programmer - Siemens Sitrans LR250 Quick Start Manual

Key Name
Clear
Decimal
point
Plus or
minus sign
Numeral
to

Quick Start Wizard via the handheld programmer

Notes:
• The Quick Start Wizard is a complete package and the settings are inter-related.
• Each time the Quick Start Wizard is initiated, the start-up settings are factory defaults.
The Wizard will not recall previous user-defined settings.
1. Quick Start
a) Point the programmer at the display (from a maximum distance of 600 mm [2 ft.]),
then press Right ARROW
b) Press Right ARROW
view.
c) Press Right ARROW
values and move directly to the next item.
d) To change a setting, scroll to the desired item or key in a new value.
e) After modifying a value, press Right ARROW
ARROW
f) Quick Start settings take effect only after you select Yes to Apply changes in step
1.7.
2.1. Material
Options
2.2. Response Rate
Sets the reaction speed of the device to measurement changes in the target range.
Options
Page EN-16 SITRANS LR250 (HART) – QUICK START MANUAL
Function (continued)
Numeric
editing
Numeric
editing
Numeric
editing
Numeric
editing
to activate PROGRAM mode and open menu level 1.
twice to navigate to menu item 1.1 and open parameter
to open Edit mode or Down ARROW
to move to the next item.
LIQUID
LIQUID LOW DK (low dielectric liquid)
SLOW 0.1 m/minute
MED 1.0 m/minute
FAST 10.0 m/minute
• Erases the display.
• Enters a decimal point.
• Changes the sign of the entered value.
• Enters the corresponding character.
to accept it and press Down
to accept default
7ML19985QX81