Siemens SITRANS LR460 HART Operating Instructions Manual page 114

The handheld programmer
Notes:
• Local programming must be enabled, to allow changes (see
on page 54).
• CLEAR can be used to clear the field.
C
• Press Right ARROW
• Press Right ARROW
digit of the Menu number flashes (the Edit mode icon is not visible).
• For Quick Access to parameters via the handheld programmer, press Mode key
to activate PROGRAM mode, followed by Home key
number (see
Hand-held programmer: key functions in RUN mode
Key
Updates mA value (HART version only)
Updates internal enclosure temperature value and displays it in LCD auxiliary region.
6
Updates echo confidence value and displays it in LCD auxiliary region.
8
Updates measurement value and displays it in LCD auxiliary region.
PROGRAMMING via the handheld programmer
To activate PROGRAM mode, point the handheld programmer at the display (from a
maximum distance of 600 mm [2 ft.]), and press the Mode key
Page D-108 SITRANS LR460 (HART) – INSTRUCTION MANUAL
to open Edit mode: the PROGRAM icon flashes.
again to accept the value and cancel Edit mode: the final
LCD Menu Structure
on page 145 for details).
display
max. 600 mm
(2 ft)
handheld
programmer
Local Operation Enable
, then enter the menu
Function
.
C
function
keys
number
keys
A5E42035355