Table of Contents
Advertisement
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of the system.
Figure 159. System health and system ID indicator
Table 86. System health and system ID indicator codes
System health and system ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
194
System diagnostics and indicator codes
Condition
Indicates that the system is powered on, is healthy, and
system ID mode is not active. Press the system health and
system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system
health and system ID button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem
persists, see the
Getting help
Indicates that the system is experiencing a fault. Check
the System Event Log for specific error messages. For
information about the event and error messages generated
by the system firmware and agents that monitor system
components, go to
qrl.dell.com
type the error code, and then click Look it up.
section.
> Look Up > Error Code,
Advertisement
Table of Contents
