Cooling fans
Removing the cooling fan cage assembly
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If installed,
remove the air
4. Disconnect the cables from system board that pass through the cooling fan cage assembly cable latch.
5. Open cable access latch to remove the cables and place them towards system front.
Steps
1. Lift the blue release levers to unlock the cooling fan cage assembly from the system.
2. Hold the release levers, and lift the cooling fan cage assembly away from the system.
Figure 31. Removing the cooling fan cage assembly
Next steps
1.
Installing the cooling fan cage
Installing the cooling fan cage assembly
Prerequisites
1. Follow the safety guidelines listed in the
CAUTION:
Ensure that the cables inside the system are correctly installed and retained by the cable
retention bracket before installing the cooling fan cage assembly. Incorrectly installed cables may get
damaged.
2. Follow the procedure listed in
3. If installed,
remove the air
4. Disconnect the cables from system board that pass through the cooling fan cage assembly.
5. If opened close the cable side wall brackets on the system.
70
Installing and removing system components
Safety
instructions.
Before working inside your
shroud.
assembly.
Safety
instructions.
Before working inside your
shroud.
system.
system.