Table of Contents
Advertisement
Figure 101. Installing GPU on GPU riser module
Next steps
1. If removed,
install the bridge
2.
Install the GPU riser
module.
3. If removed,
install the
4. Follow the procedure listed in
Removing the sponges
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the rear mounting front PERC
NOTE:
Observe the cable routing before disconnecting the cables.
4. Sponges are required only for GPUs with bridge cards.
Steps
Using the hole on the sponge, lift the sponge out of the system.
cards.
sponges.
After working inside your
Safety
Before working inside your
module.
system.
instructions.
system.
Installing and removing system components
135
Advertisement
Table of Contents
