Table of Contents
Advertisement
Figure 42. Installing a drive carrier
Next steps
If removed,
install the front
Removing a NVMe drive blank
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
3.
Remove all
drives.
NOTE:
All drives need to be installed to their original position.
4.
Remove the drive backplane
5.
Remove the drive
backplane.
CAUTION:
For proper system cooling, drive blanks must be installed in all empty drive slots.
NOTE:
NVMe drive blank is applicable for the system with x6 NVMe drive configuration.
Steps
Lift the release latch and push the NVMe drive blank out of the drive slot.
80
Installing and removing system components
bezel.
Safety
instructions.
bezel.
cover.
Advertisement
Table of Contents
