System Memory; System Memory Guidelines - Dell PowerEdge R760xa Installation And Service Manual

NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 69. Configuration 4: 8 x 2.5-inch SAS_SATA fPERC12
Order
1.
2.
3.
4.
NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.

System memory

System memory guidelines

The PowerEdge R760xa system supports DDR5 registered DIMMs (RDIMMs). System memory holds the instructions that are
started by the processor.
Your system memory is organized into eight channels per processor (two memory sockets per channel),16 memory sockets per
processor and 32 memory sockets per system.
94 Installing and removing system components
From
SIG_PWR_1 (system board power connector)
SL11_CPU2_PB6 (signal connector on system board)
SL12_CPU2_PA6 (signal connector on system board)
CTRL_SRC_SA1_PA1 (adapter PERC controller connector)
To
BP_PWR_1 (Front backplane
power connector)
CTRL_DST_PA1 (fPERC input
connector)
CTRL_DST_PB1 (fPERC input
connector)
BP_DST_SA1 (backplane
expander signal connector)