Installing The Boss-N1 Shroud - Dell PowerEdge R760xa Installation And Service Manual

Figure 126. Removing the BOSS-N1 shroud
2. Pull the BOSS-N1 shroud from the BOSS module.
Next steps
1. Installing the BOSS-N1

Installing the BOSS-N1 shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the slot on the BOSS-N1 shroud with the BOSS module.
shroud.
Safety instructions.
Before working inside your system.
Installing and removing system components 155