Dell PowerEdge R760xa Installation And Service Manual page 92

Figure 55. Configuration 2: 8 x 2.5-inch NVMe RAID fPERC12
NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 67. Configuration 2: 8 x 2.5-inch NVMe RAID fPERC12
Order
1.
2.
3.
4.
5.
92 Installing and removing system components
From
SIG_PWR_1 (system board power connector)
SL11_CPU2_PB6 (signal connector on system
board)
SL12_CPU2_PA6 (signal connector on system
board)
CTRL_SRC_SA1_PA1 (fPERC controller
connector)
CTRL_SRC_SB1_PB1 (fPERC controller
connector)
To
BP_PWR_1 (Front backplane power
connector)
CTRL_DST_PA1 (fPERC input connector)
CTRL_DST_PB1 (fPERC input connector)
BP_DST_PA1 (backplane signal connector)
and BP_DST_PB1 (backplane signal
connector)
BP_DST_PA2 (backplane signal connector)
and BP_DST_PB2 (backplane signal
connector)