Am270 - Clean Collets And Base Body - Index MS24-6 Maintenance Instruction

AM270 - Clean collets and base body
Orientation
38
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must only be carried out by staff that has received adequate training
by the machine manufacturer!
The Hainbuch "Spanntop" clamping system is provided for this lathe. This clamping
system is suitable for square, hexagonal and bar stock. The collets and collet
mountings must be cleaned regularly depending on the machine utilization, the type
of machining, and the materials used. Hainbuch offers various tools for removal and
installation.
Example: Hainbuch Spanntop system (Fig. 1)
1 Base body
2 Clamping element holder
3 Mounting screw (anti-twist pin)
4 Anti-twist pin
5 Cylinder head screws
6 Clamping element
Example: Hainbuch manual changing device (Fig. 2)
Maintenance Summary - Care activities
Maintenance Instructions
DIM123EN - 26.04.2022
MS24-6