Tie Subscriber Number Removed Digit - Panasonic KX-TD1232JT Programming Manual

4.4 TIE Line Programming

[434] TIE Subscriber Number Removed Digit

Description
Assigns the removed digits of a received TIE subscriber number for each TIE table. In this case,
digits are removed from the beginning of the received digits.
Selection
• TIE table number: 1 through 4
• Number of digits to be deleted: 0 through 6 (0=no deletion)
Default
All TIE tables – 0
Programming
1.
Enter 434.
Display: TIE Remove Digit
2.
Press NEXT.
Display: Table NO?
3.
Enter a TIE table number.
To enter TIE table number 1, you can also press NEXT.
Display example: 1:0
4.
Enter the number of digits to be deleted.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another TIE table, press NEXT or PREV, or SELECT and the desired TIE
table number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• You cannot leave the entry empty.
• You must confirm with your central office regarding the number of digits being sent.
Features Guide References
E&M (TIE) Line Service
308 E & M Programming