Panasonic KX-TD1232JT Programming Manual page 392

Programme
[448-449] Extension Ringing Assignment –
Day / Night for ISDN
[450] PRI Configuration
[451] PRI Reference CO
[452-453] ISDN Ring Service Assignment –
Day / Night
[613] ISDN Class of Service
[614-615] Outgoing Permitted Outside Line
Assignment – Day / Night for ISDN Extension
[617] CLIP / COLP Number Assignment for
Extension
[618] CLIP / COLP Number Assignment for
ISDN Extension
[990] System Additional Information
4 E & M Programming
Programme
[100] Flexible Numbering
[109] Expansion Unit Type
[128] PBX Code
[129] E&M Signal Assignment
[220] TIE First / Inter Digit Time
[340] TIE Line Routing Table
[341] TIE Modify Removed Digit / Added Dial All locations – Deleted digit=0; Added Dial=Blank
[431] TIE Table Number Assignment
[432] TIE Incoming Assignment
392
All ports – All locations – Disable (Day / Night)
B channel number – 0 line; CRC4 – Enable
All outside lines (PRI line) – CO 13
All ports – Disable (Day / Night)
All ports – Primary, Secondary – COS 1, COS 1
All ports – All outside lines – Enabl (Day / Night)
All jacks – Not stored
All ports – Not stored
See "Default" shown in the explanation table.
See "Feature Number List".
KX-TD816: C;E
KX-TD1232: Master and Slave – C;E1;E2
Not stored
Continuous
10 s
All locations – Not stored
All outside line groups – Not stored
All TIE tables – Wink
Default
Default
Default Values