Panasonic KX-TD1232JT Programming Manual page 24
Digital super hybrid system
Hide thumbs
Also See for KX-TD1232JT:
- User manual (242 pages) ,
- Features manual (232 pages) ,
- Programming manual (84 pages)
Table of Contents
Advertisement
1.6 Programming Example
Sample of Description
6. To programme another speed dial number,
press NEXT or PREV, or SELECT and
the desired speed dial number .
7. Repeat steps 4 through 6.
8. Press END.
(18)
Conditions
•
Each speed dial number has a maximum of 24
digits. The valid characters are 0 through 9,
and #
keys, FLASH, PAUSE, SECRET
–
and
(hyphen) buttons.
Features Guide References
System Speed Dialling
Programme
Address
[0XX]
[1XX]
[2XX]
[3XX]
[4XX]
[5XX]
[6XX]
24
(15)
(16)
(17)
•
•
•
•
•
•
•
•
(19)
Programming Structure
Programming Group
Manager Programming
System Programming
Timer Programming
TRS / ARS / TIE Line
Routing Table Programming
Outside Line / ISDN Line /
TIE Line Programming
COS Programming
Extension Programming
Explanation
(15) Select the best way for you to store another speed
dial number. Pressing the NEXT / PREV allows
you to select the next higher / lower speed dial
number. You can also keep pressing them until the
desired one is displayed. If you press SELECT
and the desired speed dial number, the selected
code is displayed.
(16) You can continue to programme another entry.
(17) After you have stored all your entries, finish this
programme by pressing END. After pressing END
you can go to any programme address you desire.
You can return to the Initial Message mode any
time by pressing END.
To go to the next larger programme address, do not
press END but press Soft 1 (SKP+) or
VOLUME
or rorate the Jog Dial in the
counter-clockwise direction.
To go to the next smaller programme address, do
not press END but press SHIFT + Soft 1 (SKP-)
or VOLUME
or rorate the Jog Dial in the
counter-clockwise direction.
(18) Tells you what you should notice or consider when
doing the programming.
(19) Lists all of the features related to the
programming. These features are described in
the Features Guide.
Description
These programmes may be accessed by the system
manager of the customer to meet frequent changes
requested by the customer.
Entire system programming.
Flexible system timer setting.
Assignment of Toll Restriction, Automatic Route
Selection (ARS) or TIE Line Routing Table.
Setting of outside line, outside line group, ISDN line
or TIE line values.
Setting of Class of Service (COS).
Setting of extension values.
Programming Instructions
Advertisement
Table of Contents
