Isdn Extension Progress Tone - Panasonic KX-TD1232JT Programming Manual
Digital super hybrid system
Hide thumbs
Also See for KX-TD1232JT:
- User manual (242 pages) ,
- Features manual (232 pages) ,
- Programming manual (84 pages)
Table of Contents
Advertisement
3.3 ISDN Line Programming
[430] ISDN Extension Progress Tone
Description
Enables or disables to send the progress tone to ISDN extension on ISDN port basis.
Selection
• Port number:
KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• Enable / Disable (no tone)
Default
All ports – Disable
Programming
1.
Enter 430.
Display: ISDN EXT Tone
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To assign all ports to one selection, press the
the contents programmed for Port 01.
• After this assignment, you should reset the system to make this assignment effective.
260
key in step 3. In this case, the display shows
ISDN Programming
Advertisement
Table of Contents
