Panasonic KX-TD1232JT Programming Manual page 210

2.9 Optional Programming
Area Bit
01 1 Sound source during transfer.
2 Result of pressing the hookswitch
lightly and then placing down the
handset (during an outside call; single
line telephones only).
3 Result of pressing the RECALL button
on proprietary telephones (during an
outside call). External Feature Access is
effective only during a call via an
analogue outside line.
4-7 Reserved
8 Enables or disables the dial tone
between obtaining an outside line and
dialling the phone number when using
the one-touch dial, redial or speed dial
function.
9 Result of pressing the hookswitch
lightly (single line telephones only).
10 Sets the duration of the DTMF signals
sent to the VPS ports.
12,11 Sets the time the system waits before
sending DTMF signals (such as a
mailbox number) to the VPS after the
VPS answers a call.
14,13 Sets the time the system waits before
sending DTMF signals (programmed in
[113]) to VPS after the VPS calls an
extension.
15 Assigns whether the system or the VPS
turns off the Message Waiting lamp
when the user hears a message recorded
in a mailbox.
16 Reserved
210
Explanation
Description Selection Default
0 : ringback tone
1 : Music on Hold
0 : Consultation
Hold
1 : disconnection
0 : disconnection
signal
1 : External Feature
Access
0 : disable
1 : enable
0 : Consultation
Hold
1 : disconnection
0 : 80 ms
1 : 160 ms
00 : 0.5 s
01 : 1.0 s
10 : 1.5 s
11 : 2.0 s
00 : 0.5 s
01 : 1.0 s
10 : 1.5 s
11 : 2.0 s
0 : system
1 : VPS
Feature Guide
References
1 • Call Transfer
• Music on Hold
0 Consultation
Hold
0 • External
Feature Access
• Flash
1 None
0 Consultation
Hold
0 Voice Mail
Integration
10 Voice Mail
Integration
10 Voice Mail
Integration
0 • Message
Waiting
• Voice Mail
Integration
General Programming