Ars Time - Panasonic KX-TD1232JT Programming Manual

2.4 TRS / ARS Programming

[313] ARS Time

Description
Assigns times for the four Automatic Route Selection (ARS) time schedules. It is possible to
split a day into four time zones (maximum) so that the least expensive line is selected for that
time. According to the service hours and charges offered by your carriers, enter the starting
time of each zone.
Selection
• Time schedule: Time-A / Time-B / Time-C / Time-D
• Time (hour) : 0 through 23 / Disable (no schedule)
Default
Time-A – 8:00; Time-B – 17:00; Time-C – 21:00; Time-D – Disable
Programming
1.
Enter 313.
Display: ARS Time
2.
Press NEXT to programme Time-A.
Display example: Time-A: 8:00
To programme another time schedule, keep pressing NEXT or PREV until the desired
time schedule is displayed.
3.
Enter the hour.
To set no schedule (Disable), press SELECT.
If "Disable" is selected, pressing SELECT shows the previous stored hour.
To change the current entry, press CLEAR and enter the new hour.
4.
Press STORE.
5.
To programme another time schedule, keep pressing NEXT or PREV until the desired time
schedule is displayed.
6.
Repeat steps 3 through 5.
7.
Press END.
Conditions
• The times must be programmed in sequence from Time-A to Time-D. Enter a starting time
for each time schedule. Select "Disable" for idle schedules.
• You cannot leave an entry empty.
122 General Programming