Panasonic KX-TD1232JT Programming Manual page 375

Area Bit
02 1 If an outside party is transferred and
unanswered, assigns whether Transfer
Recall occurs at the transfer initiating
extension or at Operator 1.
2 If the restriction of outside call duration
is enabled in programme
[502] Extension-to-Outside Line Call
Duration Limit, assigns if the restriction
is done for both outgoing and incoming
calls or for outgoing calls only.
3 Reserved
4
Determines if the dialled " " and "#"
will be checked by Toll Restriction. This
assignment is required for certain
central offices (CO) to prevent toll
fraud. Some COs ignore the user-dialled
" " and "#". If your CO is such a type,
select "0" (no check).
5 Enables or disables the Flash function
when an outside call is received at a
locked or toll-restricted station. Flash, if
enabled, allows the user to make an
outside call using the same line. If "0"
(disconnection signal) is selected in
Area 01 - bit 3 above, this is also allowed
for those extensions that have the
Account Code - Verified - All Calls
mode assigned.
6 Allows you to remove confirmation tone
3. This tone is sent when a conversation
is established just after dialling the
feature number for accessing the
following features: Call Pickup, Paging,
Paging Answer, TAFAS, Hold Retrieve
and Call Park Retrieve.
DECT Programming
Explanation
Description
5.4 Optional Programming
Selection Default
0 : initiating
extension
1 : Operator 1
0 : both calls
1 : outgoing calls
only
0 : no check
1 : check
0 : disable
1 : enable
0 : disable
1 : enable
Feature Guide
References
0 Call Transfer
0 None
1 Toll Restriction
0 Flash
1 Confirmation
Tone
375