Tie Outgoing Assignment - Panasonic KX-TD1232JT Programming Manual

4.4 TIE Line Programming

[433] TIE Outgoing Assignment

Description
Assings a TIE outgoing method, immediate or wink, to each TIE table according to your
central office service.
Immediate: Outgoing TIE numbers can be transmitted right after seizing the outside line.
Wink: Outgoing TIE numbers can be transmitted after receiving the wink signal from the
central office after seizing the outside line.
Selection
• TIE table number: 1 through 4,
• Immediate / Wink
Default
All TIE tables – Wink
Programming
1.
Enter 433.
Display: TIE Signal Out
2.
Press NEXT.
Display: Table NO?
3.
Enter a TIE table number.
To enter TIE table number 1, you can also press NEXT.
Display example: 1:Wink
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another TIE table, press NEXT or PREV, or SELECT and the desired TIE
table number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• The time the system waits for the confirmation wink signal can be programmed in
programme [436] TIE Wink Time Out Assignment.
The system disconnects the outside line when the time-out time expires.
• To assign all TIE tables to one selection, press the
In this case, the display shows the contents programmed for TIE table number 1.
306
( =all TIE tables)
key in step 3.
E & M Programming