[681] PS Radio System ID Reference
Description
Shows a radio system ID which is required for each PS to recognise its registered PBX.
Selection
None
Default
Not stored
Programming
1.
Enter 681.
Display: Radio Sys-ID SET
2.
Press NEXT.
Before a Radio System ID is assigned;
Display: Not Stored
After a Radio System ID is assigned;
Display example: 00123456
3.
Press END.
Conditions
• The radio system ID must be assigned to support the DECT system (KX-TD144 / TD146 /
KX-TD142). If not, only the wired extension port of the KX-TD144 can be used.
• If the radio system ID is not assigned properly, the registered PS may not work properly.
Features Guide References
None
DECT Programming
5.3 Extension Programming
371