Tie Line Programming; Tie Table Number Assignment - Panasonic KX-TD1232JT Programming Manual

4.4 TIE Line Programming

[431] TIE Table Number Assignment

Description
Assigns a TIE table number to each outside line group.
Selection
• Outside line group (TRG) number: 1 through 8,
• TIE table number: 1 through 4
Default
All outside line groups – Not stored
Programming
1.
Enter 431
Display: TIE Table NO.
2.
Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group number.
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1:Not Stored
4.
Enter a TIE table number.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another outside line group, press NEXT or PREV, or SELECT and the
desired outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• This is the first and basic programming for the E&M (TIE) Line feature. If this assignment
is changed, it will affect other programming ([432] through [436]).
• To assign all outside line groups to one selection, press the
display shows the contents programmed for outside line group 1.
E & M Programming
4.4 TIE Line Programming
( =all outside line groups)
key in step 3. In this case, the
303