Greasing - Kubota ZD1600 Series Operator's Manual

EVERY 50 HOURS
4. For (RCK60RP, RCK72RP), check the label on the
gear box before adding new oil.
Label (6)
Oil type Gear oil
Capacity
SAE SAE 90
API Service Cat-
More than GL-3
egory
IMPORTANT :
• To prevent serious
bearings and oil seals, do not mix different
kinds of oil.
RCK60RP, RCK72RP
(1) Drain plug
(2) Check plug
(3) Oil inlet plug
(4) Gear box
(5) Check plug port
(6) Rectangular label
(7) Octagonal label
5. After checking, reinstall the oil inlet plug with gauge
securely.
ZD1611LF,ZD1611RLF,ZD1611RL
(7)
Gasoline engine oil
0.4 L (0.42 U.S.qts.)
SAE 10W-30
SH or higher
damage to gears,
(A) Oil level is acceptable within
this range.
(B) Oil level

4. Greasing

WARNING
To avoid serious injury or death:
• Stop the engine and remove the key before
greasing.
Grease the following locations.
IMPORTANT :
• Put grease into front wheel until grease
overflows from both ends of the front wheel.
(1) King pin (LH, RH)
(2) Center pin
(3) Front wheel (LH, RH)
(1) Tilt lever
When you put grease to the machine universal joint,
remove the L-plate.
When reassembling, install it in the direction shown in
the figure.
MAINTENANCE
89