Greasing - Kubota ZD1211-AU Operator's Manual

MAINTENANCE
4. For (RCK60R, RCK72R), check the label on the
gear box before adding new oil.
Label
Oil type Gear oil
Capacity
SAE SAE 90
API Service Cat-
More than GL-3
egory
IMPORTANT :
• To prevent serious
bearings and oil seals, do not mix different
kinds of oil.
RCK60R, RCK72R
(1) Drain plug
(2) Check plug
(3) Oil inlet plug
(4) Gear box
(5) Check plug port
(6) Rectangular label
(7) Octagonal label
5. After checking, reinstall the oil inlet plug with gauge
securely.
68
(6) (7)
Gasoline engine oil
0.4 L (0.42 U.S.qts.)
SAE 10W-30
SH or higher
damage to
(A) Oil level is acceptable within
this range.
(B) Oil level

4. Greasing

WARNING
To avoid serious injury or death:
• Be sure to stop the engine and remove the key
before greasing.
Grease the following locations.
IMPORTANT :
• Put grease into front wheel until grease
overflows from both ends of the front wheel.
gears,
(1) King pin (LH, RH)
(2) Center pin
(3) Front wheel (LH, RH)
(1) Tilt lever
EVERY 50 HOURS
ZD1211,ZD1221