Antifreeze - Kubota ZD1600 Series Operator's Manual

MAINTENANCE
1. Stop the engine and let cool down.
2. To drain the coolant, remove radiator cap,
disconnect the lower hose and drain the coolant.
The radiator cap must be removed to completely
drain the coolant.
(1) Lower hose
3. After all coolant is drained, close the drain valve
and install the drain plug.
4. Fill with clean water and cooling system cleaner.
5. Follow directions of the cleaner instruction.
6. After flushing, fill with clean water and antifreeze
until the coolant level is just below the fill port on the
radiator. Install the radiator cap securely.
7. Fill with coolant up to the [FULL] mark on the
recovery tank.
102
EVERY 2000 HOURS OR EVERY 2 YEARS
(1) Recovery tank
(2) Radiator cap
(3) Lower hose band
(4) Recovery tank cap
(5) Radiator hose
8. Start and operate the engine for a few minutes.
9. Stop the engine and let cool.
10. Check coolant level of recovery tank, add coolant if
necessary.

2. Antifreeze

WARNING
To avoid serious injury or death:
• When using antifreeze, put on some protection
such as rubber gloves. (Antifreeze contains
poison.)
• If someone drank antifreeze, seek immediate
medical help. Do not make the person throw up
unless you are told to do so by poison control
or a health care professional. Use standard first
aid and CPR for signs of shock or cardiac
arrest. Call your local poison control center or
your local emergency number for further
assistance.
• When antifreeze comes in contact with the skin
or clothing, wash it off immediately.
• Do not mix different types of antifreeze.
The mixture can produce chemical reaction
causing harmful substances.
• Antifreeze is extremely
explosive under certain conditions. Keep fire
and children away from antifreeze.
• When draining fluids from the engine, place
some container underneath the engine body.
• Do not pour waste onto the ground, down a
drain, or into any water source.
(A) [FULL]
(B) [LOW]
flammable and
ZD1611LF,ZD1611RLF,ZD1611RL