Kubota ZD1600 Series Operator's Manual page 63

STARTING THE MACHINE
To stop:
Move and hold both motion control levers to the
"NEUTRAL" position until the machine comes to a stop.
Forward:
For forward travel in a straight line, push both motion
control levers forward equally and slowly.
Rearward:
For rearward travel in a straight line, pull both motion
control levers past center rearward equally and slowly.
General left turn:
For forward travel to the left, push the right motion
control lever further forward than the left motion control
lever.
ZD1611LF,ZD1611RLF,ZD1611RL
General right turn:
For forward travel to the right, push the left motion
control lever further forward than the right motion
control lever.
Sharp (zero) left turn:
Push the right motion control lever forward and pull the
left motion control lever rearward at the same time.
Sharp (zero) right turn:
Push the left motion control lever forward and pull the
right motion control lever rearward at the same time.
OPERATING THE MACHINE
57