OPERATING THE ENGINE
4. Operating procedure for parked regeneration
1. Park the machine in a safe area away from buildings, people, and animals.
2. Set the motion control lever to "NEUTRAL" position.
3. Set the parking brake.
4. Set the PTO lever to "OFF" position.
5. Lower the implement to the ground.
6. Clean the hood screen and the radiator screen.
7. Return the engine rpm to the idle speed.
8. Check that the regeneration inhibit switch lamp
switch
to turn it "OFF".
PM warning level 0 to 1
9. When the regeneration conditions are satisfied (from 2 to 4 and 7, 8), the parked regeneration switch lamp
starts flashing.
42
is "OFF". If the lamp is "ON", press the regeneration inhibit
Regeneration inhibited mode
Regeneration active mode
DPF REGENERATION PROCESS
PM warning level 2 to 4
ZD1611LF,ZD1611RLF,ZD1611RL