Installing The Front Caster Wheels - Kubota ZD1600 Series Operator's Manual

WHEELS
4. Remove the lock nut and the wheel bolt. Then
remove the wheel cap.
5. Remove the wheel from assembly yoke.

2. Installing the front caster wheels

(1) Lock nut
(2) Wheel bolt
(3) Yoke
1. Install the replacement wheel.
2. Install the wheel cap with the wheel bolt and the
lock nut.
3. Tighten the nut.
IMPORTANT :
• Insert the wheel bolt from the outside of the
yoke.
• Tighten the nut gradually until the wheel
bearing play is eliminated and the wheel
turns freely by hand.
Tightening torque
4. Lower the machine.
ZD1611LF,ZD1611RLF,ZD1611RL
20 to 25 N⋅m
14.8 to 18.4 lbf⋅ft
2 to 2.5 kgf⋅m
TIRES AND WHEELS
69